L45 Tractor Loader Backhoe
The L45 Tractor Loader Backhoe delivers dependability, durability and responsibility. The 45-hp Kubota engine runs cleaner and starts quickly in cold weather. The front wheel drive bevel gear assures that you always get a smooth and full power transfer with the 4-wheel drive. And the HST Plus transmission has load sensing ability controlling the pump and motor.
- 45hp Kubota diesel engine.
- HST Plus transmission sensing heavy loads.
- Backhoe Crawling Mode allows “creep” while at backhoe.
- Slant Nose Hood.
- Generous step-through deck.
- IntelliPanel™ control center.
- Rear 3-Point Hitch option.
- Independent PTO.
Gross power (SAE)
Net power (SAE)
134.1 cu. In
No. of cylinders
No. of speeds
Max. traveling speed
Range shift lever position
Seat side, right
3-point hitch lift capacity at 24 in. behind lift point
Max. PTO Power
Fuel Tank Capacity
27 x 10.50 - 15R4
15 - 19.5R4
Weight with Loader, Backhoe and ROPS/FOPS*2
Min. Turning Radius (w/ brake)
Independent, 540 rpm
3-Point Hitch (Category I & II)
Loader-integrated reinforced frame
Lift capacity to max. height of bucket bottom mid point
Lift capacity to max. height at pivot pin
Breakout force at pivot pin
One detent float position power beyond circuit hydraulic dual self-leveling valve
Net weight (Approx.)
Maximum lift height to pivot pin
Clearance with bucket dumped
Reach at maximum height
Maximum dump angle
Reach with bucket on ground
Bucket rollback angle
Overall height in carrying position
Performance Rating (no load)
Raise to full height (self-leveling on)
Raise to full height (self-leveling off)
Lowering time self level valve (self-leveling on)
Lowering time self level valve (self-leveling off)
Attachment rollback time (self-leveling on)
Attachment rollback time (self-leveling off)
Attachment dumping time (self-leveling on)
Attachment dumping time (self-leveling off)
Digging force using bucket cylinder (approx.)
Digging force using dipperstick cylinder (approx.)
Trunnion type boom swing mechanism
Digging depth, maximum
Digging depth, 2ft. Flat bottom
Digging depth, 8ft. Flat bottom
Operating height, fully raised
Reach from swing pivot
Swing pivot to rear axle center line
Angle of departure per SAE J1234
*1 11.8 GPM for loader/backhoe, 6.6 GPM for backhoe boom swing, 6.6 GPM for power steering.
*2 With round back loader bucket, 18" backhoe and standard tires.
* The specifications are taken with KUBOTA's L45 tractor. (Tire size: Front 27 x 10.50 - 15R4, Rear 15 - 19.5R4)